Owner Manual

Locate the unit in an indoor area that allows for easy servicing (see image below). Make sure
that the air filter access and unit access panels are easily accessible. Provide sufficient room to
make all ground loop, well water, DHW, condensate, and electrical connections. If the unit is
placed in a closet, make provision for adequate service access and proper return air flow to the
unit. Some installations may require a condensate pump to take the condensate to a suitable
drain location. Do not locate the unit in an area that is subject to freezing.
5.0 Ductwork Considerations
Important Note: If ductwork is installed in an attic area, the ductwork needs to be built “low
Page 10