Use and Care Manual

mrcool.com
Cassette Panel Installation & Wireless Controller Module
Page 41
3. Open the front panel and insert the wireless
module into the designated interface (refer to
Fig. 7.9 and the images below).
4. Reinstall cover by reinstalling the screw you
previously removed. Then, close the side panel.
For more detailed information about the
wireless module and its operation, please
refer to the user manual that was included
with the module.
Infrared
Controller Plug
5 core
Designated Interface
for Wireless Control Module
The interface inside the cassette is only
compatible with the wireless control module
that is available from the unit manufacturer.
If any other module from another
manufacturer is attempted to be used to
operate this unit, it could cause it to
malfunction.
WARNING
Fig. 7.9
IMPORTANT!
Once the entire installation has been
completed and the system has been
fully tested, the area above and
around the cassette should be
re-insulated. This will help to guard
against the condensation/sweating of
the unit that can occur due to the
differences in the room temperature
the cassette provides air to and the
environment it is installed in
(example: attic). If the area is not
re-insulated it could cause property
damage and the system to
malfunction!
Insert Wireless
Control Module into
this connection point