How to Guide

STEP 8 - outside

1. Remove the electrical cover.

2. Wires and terminals that are numbered should

be matched and connected accordingly.

4. Terminal L1(A) of the outdoor unit must connect

with terminal 1 on the indoor unit. Continue to

match zone to zone for any additional connections.

Refer to the diagrams / photo at the bottom left.

WARNING

BEFORE PERFORMING ANY ELECTRICAL WORK, TURN OFF ALL

POWER TO THE SYSTEM.

1. Wire colors of this series / model may diﬀer from previous

models, other series and general conventions.

2. All wiring must be performed in accordance with the

wiring diagrams shown here and all municipal, state and

federal regulations.

4. This product is designed to run on 60Hz frequency which is

the North American standard.

5. A certiﬁed electrician is required to supply power from a

disconnect of an appropriate rating - see manual.

STEP 7 - outside

wrapped from

inside unit

Quick Connect

connections

keep line excess

bundled and coiled

then wrap together

wrap the Quick Connect®

connections with the black

sound deadening pads.

Up to Three Zones

OPTIONAL

Up to Four Zones

LPPUS REWOP Y

L1(A)

L2(A)

S(A)

L1(B)

L2(B)

S(B)

1(C) 2(C) 3(C) 1(D) 2(D) 3(D)

TO A

TO B

TO D

TO C

OPTIONAL