Instructions / Assembly

Page 17 mrcool.com
Indoor Unit Installation
Wall
Indoor Outdoor
Fig.4.2
0.2 - 0.3in
(5 - 7 mm)
0.2 - 0.3in
(5 - 7 mm)
MOUNTING PLATE DIMENSIONS
Different models have different mounting plates.
In order to ensure that you have ample room to
mount the indoor unit, the diagrams to the right
show different types of mounting plates along
with the following dimensions:
• Width of mounting plate
• Height of mounting plate
• Width of indoor unit relative to plate
• Height of indoor unit relative to plate
• Recommended position of wall hole
• Relative distances between screw holes
Fig. 4.3
Series 12K Models
192mm (7.55in)
232mm (9.15in)
128mm (5.05in)
43mm (1.7in)
297mm (11.7in)
Right rear wall
hole 90mm (3.5in)
Indoor unit outline
Series 18K Models
802mm (31.6in)
965mm (38in)
1080mm (42.5in)
1259mm (49.55in)
43mm (1.7in)
43mm (1.7in)
144mm (5.65in)
58mm (2.3in)
319mm (12.55in)
57mm (2.25in)
40mm (1.55in)
Right rear wall
hole 90mm (3.5in)
Series 24K Models
138mm (5.45in)
34mm
(1.35in)
Indoor unit outline
219mm (8.6in)
553mm (21.77in)
643.6mm (25.3in)
300mm (11.8in)
335mm (13.2in)
Right rear wall
hole 90mm (3.5in)
Series 36K Models
53.5mm
(2.1in)
47mm (1.85in)
76mm(3in)
53.5mm (2.1in)
47mm (1.85in)
148.7mm
(5.85in)
151mm (5.95in)
174.3mm (6.85in)
Indoor unit outline
172mm (6.8in)
362mm (14.25in)
Right rear wall
hole 90mm (3.5in)
389mm (15.3in)
52mm (2.05in)
332mm (13.05in)
257mm (10.1in)
52mm (2.05in)
Indoor unit outline
426mm(16.8in)
517.4mm(20.37in)
Correct orientation of Mounting Plate
NOTE REGARDING WALL STUDS
1. Wall Mounting Bracket should be installed
on studs.
2. Standard US Studs are 16” on-center.
3. 16” on-center correlates with the holds
marked “US” on the metal bracket.