Install Manual

Page 4

Safety Precautions

mrcool.com

Note about Flourinated Gasses:

. All wiring must be properly arranged to ensure that the control board cover can close properly.

If the control board cover is not closed properly, it can lead to corrosion, which can cause the

connection points on the terminal to overheat, which can result in ﬁre and/or electrical shock.

10.

DO NOT

combustible materials.

DO NOT

the unit itself.

If connecting power to ﬁxed wiring, the following must be incorporated within it, in accordance with the wiring

rules; an all-pole disconnection device (which has at least 1/8 in (3 mm) of clearances in all poles), and have a

leakage current that may exceed 10 mA, the residual current device (RCD) having a rated residual operating

current not exceeding 30 mA, and disconnection all must be present.

11.

This appliance is not intended for use by individuals (including children) with reduced physical, sensory, or mental

capabilities. It is also not intended for use by individuals with a lack of experience or knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should

be supervised at all time to ensure that they do not play with the appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualiﬁed

individuals in order to avoid a hazard.

12.

operate your air conditioner in a room where it could be exposed to water, such as a bathroom or laundry

room. Exposure to excessive amounts of water may cause electrical components to short circuit.