Remote Control Manual

5
TIMER OFF Button
Press this button to initiate the auto-off time
sequence. Each press will increase the auto-timed
setting in 30 minutes increments. When the setting
time displays 10.0, each press will increase the
auto-timed setting 60 minutes increments. To
cancel the autotimed program, simply adjust the
auto-off time to 0.0
LOCK Button
Press this recessed button to lock all current
settings, and the remote control will not accept any
operation except that of the LOCK. Use the LOCK
mode when you want to prevent settings from
being changed accidentally. Press the LOCK button
again to cancel the LOCK function. A lock symbol
will appear on the remote control display when the
lock function is activated.
TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset temperature
at cooling or heating operation in the shortest time
(if the indoor unit does not support this function,
there is no corresponding operation happened
when pressing this button.)
NOTE:
•Buttons design is based on typical model and might
be slightly different from the actual one you
purchased the actual shape shall prevail.
•All the functions described are accomplished by the
unit. If the unit has no this feature, there is no
corresponding operation happened when press the
relative button on the remote controller.
•When there are differences between the Remote
Control Manual and User Manual on function
description, use the description from the User Manual.
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
TIMER ON
ECO
ON/OFF
TIMER OFF
RESET LOC K
1
2
4
5
6
7
8
3
10
9
11
12
13
14
O
SET TEMPERATURE ( F)
SWING
LED
DISPLAY
CLEAN
/
AIR
TURBO
SWING
Model: RG51F3/EU1 and
RG51F/EU1(This model does not
have clean air button
12
13
14
Operation of Buttons
For more details visit www.MrCool.com