Remote Control User Manual

3
4
MODE
MODE
FAN
FAN
TEMP
TEMP
SLEEP
SLEEP
ON/OFF
ON/OFF
SILENCE
FP
SILENCE
FP
TIMER
ON
TIMER
ON
TIMER
OFF
TIMER
OFF
1
1
2
2
4
4
3
3
8
8
9
9
7
7
5
5
6
6
10
10
12
12
11
11
13
13
14
14
Operation of buttons Operation of buttons
1
ON/OFF Button
This button turns the air conditioner ON
and OFF.
2
Press this button to modify the air conditioner
mode in a sequence of following:
MODE Button
AUTO COOL
DRY
HEAT
FAN
4
SLEEP Button
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if MODE, FAN SPEED
or ON/OFF button is pressed.
Active/Disable sleep function. It can
maintain the most comfortable temperature
and save energy. This function is available on
COOL, HEAT or AUTO mode only.
For the detail, see sleep operation in
USER S MANUAL.
,
,,
,,
,,
,,
3
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
FAN Button
NOTE: You can not switch the fan speed in
AUTO or DRY mode.
SELF CLEAN Button
Active/Disable Self Clean function.
Under SELF CLEAN mode, the air
conditioner will automatically clean and dry
the Evaporator and keep it as fresh for the
next operation.
6
5
TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset temper-
ature at cooling or heating operation in the
shortest time.
SWING DIRECT
SWING DIRECT
LED FOLLOW
ME
LED FOLLOW
ME
TURBO SELF
CLEAN
TURBO SELF
CLEAN
TIMER ON Button
9
Press this button to initiate the auto-on
time sequence. Each press will increase
the auto-timed setting in 30 minutes
increments. When the setting time displays
10.0, each press will increase the auto-
timed setting 60 minutes increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0.
8
SILENCE/FP Button
Active/Disable SILENCE function. If pushing
more than 2 seconds, the ‘FP’ function will
be activated, pushing more than 2 seconds
again to disable.
When the Silence function is activated, the
compressor will operate at low frequency
and the indoor unit will bring faint breeze,
which will reduce the noise to the lowest
level and creat a quiet and comfortable room
for you. Due to low frequency operation of
compressor, it may result in insufficient
cooling and heating capacity.
The ‘FP’ function can only be activated
during the heating operation (only when the
setting mode is HEAT). The unit will operate
at a setting temperature of 46 F.The display
window of indoor unit will display ‘FP’. Press
the buttons of ON/OFF, SLEEP, FP, MODE,
FAN SPEED,UP or DOWN while operating
will cancel the ‘FP’ function.
O
7
UP Button ( )
Push this button to decrease the indoor
oo
temperature setting in 1 F increments to 62 F.
DOWN Button ( )
Push this button to increase the indoor
oo
temperature setting in 1 F increments to 86 F.
NOTE Temperature contol is not available
in Fan mode.
NOTE: Press and hold UP and DOWN buttons
together for 3 seconds will alternate the temper-
O O
ature display between the C & F scale.
For more details visit www.MrCool.com For more details visit www.MrCool.com