Remote Manual

Page 14mrcool.com
How To Use Basic Functions
AUTO Mode
In AUTO mode, the unit will automatically select
the COOL, FAN, or HEAT operating mode based
on the set temperature. To select AUTO mode
follow these steps:
1. Press the MODE button and select AUTO
mode.
2. Set your desired temperature using the
TEMPERATURE or buttons.
3. Press the ON/OFF button to start the unit.
NOTE: FAN speed cannot be set or adjusted
in AUTO mode.
COOL Mode
1
3
2
1
3
2
4
SETTING TEMPERATURE
The operating temperature range for units is
62-86°F (17-30°C) or 68-82°F (20-28°C)
(model dependent). You can increase or
decrease the set temperature in 1°F (1°C)
increments by using the the Temperature
or buttons on the remote.
How to Use Basic Functions
ATTENTION
Please ensure the unit is plugged in and power is available before operation.
To select COOL Mode follow these steps:
1. Press the MODE button and select COOL
mode.
2. Set your desired temperature using the
TEMPERATURE or buttons.
3. Press the FAN button to select the desired fan
speed: AUTO, LOW, MED, or HIGH.
4. Press the ON/OFF button to start the unit.