Use and Care Manual


Page 10

Unit
Specifications
and Features
Other Features
• Auto-Restart (some units)
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
• Anti-mildew (some units)
When turning off the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue to operate at very low power to dry
up condensed water and prevent mildew
growth.
• Wireless Control (some units)
Wireless control allows you to control your air
conditioner using your mobile phone and a
wireless connection.
For the USB device access, replacement,
maintenance operations must be carried
out by professional staff.
• Louver Angle Memory (some units)
When turning on your unit, the louver will
automatically resume its former angle.
• Refrigerant Leakage Detection
The indoor unit will automatically display “EC” or
“EL0C”or flash LEDS when it detects refrigerant
leakage.
Set
temperature
1hr
1hr
Keep
running
SLEEP Operation
Saving energy during sleep
Heat mode( -1 C/2 F) per hour
for the first two hours
Cool mode(+1 C/2 F) per hour
for the first two hours
A guide on using the infrared remote is not
included in this manual. Not all the functions
are available for the air conditioner. Please
check the indoor display and remote control
of the unit you purchased.
• Sleep Operation
The SLEEP function is used to decrease
energy use while you sleep and don’t need
the same temperature settings to stay
comfortable. This function can only be
activated via remote control. The
Sleep function is not available in FAN or DRY
mode.
Press the SLEEP button when you are ready
to go to sleep. When in COOL mode, the
unit will increase the temperature
by 1°C (2°F) after 1 hour, and will increase
an additional 1°C (2°F) after another hour.
When in HEAT mode, the unit will decrease
the temperature by 1°C (2°F) after 1 hour,
and will decrease an additional 1°C (2°F)
after another hour.
The sleep feature will stop after 8 hours and
the system will keep running with final
situation.