Technical data

- 14 -
4.2. Unpacking
Balance AS with weighing pan Φ 85 mm:
• open side doors of the weighing
chamber,
• inside the weighing chamber place lower
shield of the weighing chamber (1),
• put centering ring [framing facing
downwards] (2),
• in the centre of centering ring assembly
the weighing pan (3),
• put anti-draft shield in the chamber (4),
• close side doors of the weighing
chamber,
• plug the balance to mains,
pin of power adaptor should be
connected to socket in the back of
balance housing.