Technical data

- 126 -
17.11.1. Means of operation
• Enter the mode <PEAK HOLD>
Once you select the mode, the function is activated and the information
about the net mass appears in the bottom line (only if a different mass
has not been selected by a user).
In order to operate properly, you should set the threshold in grams. It is
the indicating point beyond which the function starts to register
maximal force apllied.
• From now on the balance registers and holds every single weighment
which is above the threshold, and is higher than the result of the
previous peak hold. If the software detects a mass above the
threshold, the highest detected indication is held on the main display
and the pictogram <Max> is shown at the top of the display.
A user can print the result out by pressing
button.