Technical data

- 125 -
17.11. Peak hold
This function enables peak hold applied to the weighing pan during a single
checkweighing process. Apart from standard settings for this mode (described
in the weighing mode), additional setting has been introduced.
The option is available in the settings for mode <PEAK HOLD>
This is:
• THRESHOLD – which specifies the starting control point of peak hold on
the weighing pan by the balance software. It should be remembered,
however, that the peak hold must be set according to the needs before
starting the weighing process
F button shortcuts
The function enables the option of quick access for weighing functions,
which are available when buttons F1, F2, F3 or F4 are pressed.
In the mode <PEAK HOLD> the following options are available, which a
user can assign to each of the F buttons:
NONE – no function assigned to the button
SELECT PRODUCT – function initiates the option of selecting a product
from product database
LOG IN – function initiates the option of selecting and logging-in of a
balance’s user
ENTER TARE – function initiates the option of inserting packaging mass
SELECT TARE – function initiates the option of selecting packaging
mass from product database
PRINT HEADER – function initiates the print-out of a designed header
PRINT FOOTER – function initiates the print-out of a designed footer
VARIABLE 1 – function initiates the selection and editing of variable 1
VARIABLE 2 – function initiates the selection and editing of variable 2
The way of declaring the function is described in the section relating to
the weighing mode settings <F button shortcuts>.