System information

- 85 -
18.13.2. Solids’ density
For the function it is recommended to use quick access button which enables
settings changing. Solids’ density can be defined in three various liquids:
− Distilled water
− Alcohol
− Other liquid of known density
If distilled water or alcohol are
chosen, product temperature should
be given. After temperature entering,
product density change will take
place automatically.
PROCEDURE:
o Press SOLIDS quick access
button
o Option connected with the
function will be displayed
o Choose liquid type
o measure and enter its
temperature
o if OTHER liquid is chosen- enter
its density
o After the parameters setting,
press START FIELD.
o Scale is ready for operating
Caution:
1. Solid density measurement is
about defining sample mass in
air, then in chosen liquid.
2. While analysis, liquid temperature
should be stable.
3. Air bubbles adjoined to sample
surface can be measurement
distorting factor while weighing in
liquid.
o Information given In Info field on
COMMAND BAR should be
followed
− Object should be placed on
top set pan: weighing in1
− After indication stabilization,
OK button should be
pressed
− Object should be removed
and placed on bottom set
pan: weighing In 2
− After indication stabilization, OK button should be pressed
− Density result is displayed.