System information
- 8 -
XAB-Y analytic scales
A – scale with d=0,01mg unit
B – scale with d=0,1mg unit
After scale installing at operating place,
following shiuld be set:
1 – bottom ring
2 – scale pan
3 – pan shield
After the elements setting, additional
devices should be connected and
scale should be connected to power
source. Power socket is located on
back side of scale casing.
Pipettes calibration
Remove the pan and put on its place:
- pipettes calibration chamber
- inside the chamber, pan and other
elements should be set up.
ASB-Y analityc scales
A – csale with d=0,01mg unit
B – scale with d=0,1mg unit
After installing scale in its operating
place, following should be set:
1 – bottom chamber shield
2 – Centre ring
3 – scale pan
4 – pan shield
After the elements setting, additional
devices should be connected and
scale should be connected to power
source. Power socket is located on
back side of scale casing.