System information

- 77 -
Caution :
From the level of Quick Access Buttons reference masses located In base cannot be
eliminated.
Set 100%
After the symbol pressing, current display state is treated as100% pattern. It
is REFERENCE MASS defining through weighing.
After the operations performing, reference mass is updated automatically.
Statistics
Statistic data is expressed in [%]. After the symbol pressing, statistics content
can be seen and it can be deleted.
18.11.1. Reference masses base creating
Reference masses base contains numerical values and defined elements’
names. Within the base following reference masses can be either added or
deleted if they are not used.
Full access to the Base is possible
from internal menu and depends on
user’s authority.
PROCEDURE:
o in % operating mode, at any
time, grey information field
should be pressed
o internal menu will be displayed
o rewind menu to Reference
Masses Base field
o press Reference Masses Base
button
o if the base does not contain any
elements, press „Add” symbol
o Numeric keyboard will be
displayed, then enter value of
defined reference mass. Accept
it with OK.
o The mass you have entered Has
default „Reference mass” name.
o Press name and enter suitable
one
o accept it with ENTER