System information

- 74 -
18.11. Percentage deviations In relation to pattern’s mass
Percentage deviations is a procedure of comparing weighed product
to reference mass. The operation is expressed in [%].
While declaring, mass value should be given, e.g. 50.0g, that is
100%. It is a reference point for following measurements.
Additionally, together with deviations, DOSING and CHECKWEIGHING functions can
be active.
Quick access buttons connected with deviations function. Choose Yes (visible) or No
(invisible) option for each button.
Calibration Reference mass
Tare setting Checkweighing
Tare recalling Dosing
Heading print Reference masses base
Text foot print Set 100%
Meter clearing Statistics
ID definition xxx Non-standard buttons
Quick access buttons’ use and operating has been described In point 18.6. Weighing
operating mode parametres- buttons.
Other buttons should be used as instructed In point 18.7.
Information connected with checkweighing:
o bar chart
o additional unit
o tare
o gross
o meter
o bottom threshold
o top threshold
o target mass
o statistic data /difference, amount , total, standard deviation, etc./
o ID codes
o non-standard information
o non-standard information defining
For each information YES or NO option should be chosen as displaying criteria.
CAUTION: non-standard information defining has been described In point 18.8.4.