System information

- 62 -
18.8.4. Details counting operating mode parametres - information
Information connected with weighing procedure
are presented In grey information field. Max. 6
pieces of information can be loaded there.
If you choose more, only first 6 will be shown.
Bar chart YES
It is a meter related to feeding and checkweighing operating. It shows the
functions’ operating In graphic way. It is visible only if „Checkweing” or
„Feeding” buttons have YES option (quick access buttons declaring).
Additional unit YES
In this field weighing result In declared unit is displayed, the unit is declared In
<Units>menu as additional
Tare YES
In this field current tare value (In the same Basic unit) is displayed.
Gross YES
In this field current Gross value (In the same Basic unit) is displayed.
Meter YES
In the field information concerning amount (order) of measurements performed
is displayed.
Bottom threshold NO
The information show bottom threshold value, that is declared for
checkweighing function, e.g. 20 pcs
Top threshold NO
The information shows top threshold value that is declared for checkweighing
function, e.g. 25 pcs
Target mass NO
The information shows item amount that should be reached while feeding
procedure(amount feeding In this case)
Statistic data NO
For each of them option Yes or No should be Chosen.
ID codes NO
„ID1“, „ID2“, „ID3“, „ID4“, „ID5“: The fields show indicators introduced by „ID”
function button.
Hint: Instead of „ID1“, „ID2“, „ID3“ i „ID4“ their loaded names are displayed.