System information

- 6 -
1. 2. TRANSPORT AND STORAGE
2.1. Delivery verification
Packing and device should be checked respecting external damage directly after it has
been delivered.
XAB-Y ASB-Y BPS-Y APPB-Y
Element’s type
d
0,01mg 0,1mg
0,01
0,1mg
1mg 10mg 0,1g
φ 85mm pan • •
φ100mm pan • •
128 x 128 pan
•
190 x 190 pan
•
346 x 258 pan
• •
Bottom weighing
cell shield
• • •
Centre ring
• • •
Anti-blast cylinder
shield
•
Anti-blast glass
shield
•
Pan mandrels- 4
pieces
• • •
Feeder
• • • • • •
Protective cover
Carrier hook
•
2.2. Casing
All casing elements should be stored In order to be used for future transport. Only
manufacturer casing can be used for scale’s transport. Before packing, cables must be
disconnected and movable elements must be removed (pan, shields,pads). Scale’s elements
should be packed in manufacturer casing to protect it from damage during transport.