System information

- 55 -
 print button
It contains «PRINT»button operation defining . Options accessible:
ο „Stable“
After pressing « PRINT » button, result will be printed only if the indication
is stable.
ο „Always“
After pressing « PRINT » button result will be printed immediately,
irrespective if the indication is stable or not.
○ „Off“: « PRINT » button is not active
 ID definition
In „ ID definition“ 12 codes can be activated, they are accessible after function
button pressing and their names can be changed.
Codes („ID1 “ … „ID12 “):
If there are no defined codes, symbol „ADD” should be pressed- a keyboard
will appear. A new ID name should be loaded and accepted with «Enter»
button. In order to change name of existing ID a code should be Chosen that is
to be changed and a new name should be entered. Name can consist of
maximum 15 signs. Using ,,DELETE” button, ID eliminating from the list
operation is activated.
 Hint: Codes are given standard symbols: „ID1“, „ID2“, „ID3“ …“. They can be replaced
with names.
 automatic tare
ο active: YES / NO
ο minima mass: it is mass over which automatic tare function is activated.
 weighing meter
ο active: YES / NO
ο number: defining how many weighings will be saved In scale’s memory
/max 999/
ο footer after zeroing
ο zeroing after footer
ο statistics zeroing aftr footer
ο max. number
 tare
In „Tare” menu names and values of max 10 tares can be changed. They will
be accessible after „Tare” function button pressing. In order to change data,
tare to be changed name or “ADD” symbol should be pressed. Window with
keyboard will appear, where name can be changed. Names can consist of
max 15 signs.
In order to change tare value, screen area with displayed tare value should be
pressed; numeric keyboard will appear, where required value can be loaded.