System information

- 54 -
For weighing mode additional options are accessible
 automatic print
ο accessible: YES / NO
ο minimal mass
It is mass below which indication must decrease, to make following automatic
print possible.
 definition of unit number 1
− active: YES / NIE
− operation, that is, how the unit will be counted
ο F x Net or
ο F / Net
− Parameter: value, by which Net value will be divided or multiplied
− New unit symbol
− Format of unit
Example: setting „0.05“ defines two decimal places rounded to 5 ( it
means that value 123.4777 will be rounded to 123.50)
Hint:
 The function can be used only for weighing result picture definition decreasing. Value
beyond scale’s maximal definition should not be entered.
 definition of unit number r 2
/ like for unit number 1/
 prints
print type choice is generated after PRINT button pressing: standard or
non-standard print