System information

- 52 -
18.6. Weighing operating mode parametres- quick access buttons
Buttons accessible for weighing mode. If YES
option is ser for button- it will be automatically
shown on bottom navigation bar of the main
display. This make it so called “HOT” button,
that means quick access to the most frequently
performed operations.
CALIBRATION
YES
„Calibration“ of scale using internal calibration mass
PRECISION 1/10
YES
The button enables changing the displayed weighing result precision
Caution:
For metrological reasons Picture definition changing May not be possibile In some
scales cases.
TARE SETTING
YES
Numerical loading constant tare value. After pressing the button, numerical
keyboard will be displayed, which is used for known tare loading. After
pressing <OK> scale returns to weighing application and on display minus sign
followed by loaded tare value appears. It should be remembered that tare
value should be loaded with precision adequate to scale’s one.
TARE RECALLING NO
Calling initially defined tare value. After pressing the button, a list of tares
declared is displayed and then the required tare should be chosen. After
pressing <Enter>, scale returns to weighing application and minus sign
followed by chosen tare value appears on display.
HEADING PRINT NO
TEXT FOOT PRINT NO
The buttons enable heading and text foot of defined STANDARD print printing
METER CLEARING NO
The button enables defining the initial value of measuring meter.
ID DEFINITION N0
„ID“ function button enables codes (description texts) assigning to individual
weighing processes. The codes will be also placed on reports prints. After
function button pressing a window appears, In which ID is chosen and required
text is loaded.