System information

- 5 -
1. BASIC INFORMATION
1.1. Scale’s intended use
Scale is used for weighed loadings precise measurement performed in laboratory
conditions. It can be used only as non-automatic scale, so weighed product should be
placed gently in centre of product bearing surface, that is on the pan.
1.2. Operating conditions
Scale must not be used in explosive or other hazard conditions. No constructional scale
modification is allowed.
1.3. Warrantycconditions
Warranty does not cover:
• Damage as result of using scale inadequate to its intended use
• Damage or disturbance of stickers protecting scale from opening
• Mechanical failures or damage caused by liquid, water or usual wear and tear,
• Inappropriate setting or electrical system failure,
• Measuring system overloading.
1.4. Metrological parameters inspection
Scale’s metrological characteristics are supposed to be checked by user in fixed time
intervals. Checking frequency is caused by operating scale’s environmental factors,
weighing process kind and valid quality monitoring system.
1.5. The manual’s significance
It is very important to read the manual carefully before switching on and starting the scale
even if user is experienced and has worked with the scales’ type before.
1.6. Scale users’ traning
Scale should be used and supervised by trained and scale-experienced users only.