System information

- 43 -
PRINTS USING BASIC RULES
1. PRINT buton pressing on scale’s casing causes painting variables, which are
shown on field LINE of standard print if they have attribute = YES (see
variables list below).
2. Variables with YES attribute, shown In HEADING or TEXT FOOT will be
printed ONLY after Heading printing or Text Foot symbol pressing. The
symbols should be placed In bottom display bar. Symbol placing procedure:
CERTAIN USER symbol loading procedure:
− move on to user’s parametres
( SETUP button can be also
Pressed, then Users symbol)
− choose user’a name; after
displaying the functions
connected with user, pass to the
screen showing Units-Operating
Modes- Access
− Press active „OPERATING
MODES” area, all scale’s
implemented operating modes
will be shown.
− Choose an operating mode, e.g.
WEIGHING, with which Text foot
painting or Reading painting
operation is to be connected.
− Choose BUTTONS field
− For HEADING and TEXT FOOT prints, YES attribute should be set
Return to weighing:
− Pressing repeatedly return button or
Pressing and HOLDING SETTING
SYMBOL
(see point 6.3. Quick return to weighing)
On bottom display bar two symbols will appear: heading print and text foot print .