System information

- 35 -
18.1. New user adding
In top display part symbol PLUS should be pressed.
A panel will be displayed, where user’s name should be entered and
<OK> should be pressed. New user’s name will be displayed in users’
panel
Caution:
Not each user can carry out the operation. It depends on what authority user has.
18.2. User elimination
Press ,,MINUS” symbol on top of display window. Panel showing all users
will be displayed. A user to be eliminated should be chosen. After pressing
the user, he is eliminated automatically.
The operation does not require acceptation, so user elimination should be considered
carefully before the action.
Caution:
 Ability to perform the operation depends on the user’s authority so not every user
can do that.
 DEFAULT user cannot be eliminated.
18.3. User choosing
To choose a user, who should be active at a certain time, an
appropriate field on the left of user’s name should be pressed. Pressing
causes choosing a user, whose parametres are displayed
AUTOMATICALLY and the user’s name is displayed on top display
part.
Caution:
 Each user has some limits in scale using. The limits range is defined by scale’s
administrator- DEFAULT USER.
18.4. User’s settings
In order to get access to user’s settings, user’s name should be pressed. For
ergonomics reasons and in order to enable active field quick sernice, all bar can be
used, except the part concerning user choosing.
a – area enabling settings access; b – user choosing area