System information

- 28 -
10. SCALE’S CALIBRATION
In order to assure precise weighing process, it is required to load
periodically to scale’s memory a correcting factor of scale’s indication
relating to weight standard. Such operation is called scale’s
calibration.
Calibration types:
 automatic internal calibration
 half-automatic internal calibration
 external weight calibration
Caution: While calibration process no load must be placed on
the scale’s pan!
Temperature change range as initial for temperature calibration depends on scale’s
type, as shown below:
0,4°C – for MGB , XAB-Y with d=0.01mg, ASB-Y with d=0.01mg scales
0,8°C – for ASB-Y and XAB-Y with d=0.1mg scales
3°C – for BPS-Y i APPB-Y scales
If needed, user can change the settings as instructed below.
In order to enter adjusting setting option
press SETUP button or symbol on bottom display bar
Programme’s main settings window is displayed. Press<Calibration>, then dialog box
with calibration procedure settings will be displayed.