System information

- 26 -
9. SCALE SOFTWARE
Software consists of following parts:
– Users’ profiles
– System setting
– Functions
9.1. Users’ profiles
Users’ profile enables adapting the scale and its applications to
individual user’s needs and certain tasks. User’s profile is setting
collection, which user can define and call by pressing single button.
While switching on the scale, last used profile is automatically activated.
“Default” profile is a starting point, to which user can turn back any time pressing
<Default> user. The profile is standard factory settings collection, which can be used
by each user. Saved in “Default” profile settings can be changed optionally.
Apart from „Default” profile there are 10 more users’ profiles, whose settings can be
optionally modified.
«F1» button is used for required user choice. All settings loaded while certain profile
is active, will be saved in the profile. To the settings belong both specific functions
setting and individual user setting, but not system setting (see below).
Scale’s protection system (see following part of the manual) enables defining user’s
profile access authority, in order to protect it from unauthorized change loading.
Settings enable adapting scale to operating mode and tasks performed by certain
user. After a user has been chosen, his assigned individual settings are activated
automatically.
9.2. System settings
System settings (e.g. peripheral devices settings) are independent of
user’s profile or function and concern all the system. System’s setting
are available after pressing «SETUP» button or appropriate symbol.
Certain settings hints can be found in following part of the manual.
9.3. Functions of operating modes
• Functions are progrmme’s module used for specific
weighing tasks carrying out. Scale is equipped by
manufacturer with various application set (e.g. simple
weighing , statistics, formulation, item counting, percentage
weighing and density determining