System information

- 22 -
8. BASIC TERMINAL AND SCALE’S SOFTWARE OPERATION
The following chapter describes display and terminal operation elements and explains
scale’s software operating rules. The description relates to all scales equipped with this terminal
type, irrespective of metrology parameters.
TERMINAL’S CHARACTERISTICS
1. Zoom in sensors.
Both non-touchable sensors can be assigned to menu or
button function (e.g. cabinet door opening , zeroing, printing
etc.) In order to choose certain function user needs to move
his hand over appropriate sensor (maximal hand- sensor
distance: 5 centimetres. Sensor approves receiving the order
by sound signal and then needed function starts operating.
None of the sensors has assigned a certain function as a
standard. It is up to the user what function will be assigned to
each sensor.
2. «F1»«F1» button
Pressing the button causes moving from any application
optional menu level to user choosing, profile defining or
edition of defined user’s profile( more information concerning
application and users’ profile can be found in following manual
part).
User’s profile enables defining and recording of individual
settings. It enables optimum scale’s adaptation to certain user
or certain tasks.
3 «F2»button
The button enables scale’s function choice (e.g. simple
weighing, statistics, formulation, pieces counting, weighing In
percentage terms and density defining).