System information
- 19 -
7. WEIGHING PROCEDURE
To proceed simple weighing process, only terminal’s right side buttons need to be used.
Scale is equipped with buttons separate for zeroing, tarring and print initiation.
7.1. Scale zeroing:
Pressing the button causes new zero point indication. From now
on all weights (tare including) are measured according to the
point. After scale’s zeroing, tare and net(gross) are equal to 0.
Before new weighing process starting, especially tarring value
measuring, zero button should be always pressed. Zero range
equals +/-
2%
of maximal scale’s capacity.
7.2. Scale tarring:
Press TARE button. „Net“ symbol means that all indicated values
are net weight.
Indication: negative value tarring is unacceptable and results in
error indication. In such case scale should be zeroed and next
tarring procedure ought to be conducted.
Weighing process:
Put product to be weighed on the scale’s pan. After indication stabilization, weighing result can
be read. If TARE function was used before, NET symbol will appear on display.