System information

- 12 -
5.1. Automatic level sensor operating – ,,ALARM” function
If leveling sensor detects incorrect setting, level
symbol will change(red smallest circle), warning
note will appear.
In order to level the scale, ENTER should be
pressed
Level function control panel will be displayed.
Symbol of scale with pulsing arrows is showed
next to level symbol. Pulsing arrows show
direction of correct feet turning as to level the
scale properly. Scale’s view depends on scale
type.
Views and arrows’ directions that change while leveling, help user to level the scale.
Blue point indicates level state. Feet should be turned according to the pulsing
indicators in such a way that the blue point is placed in the centre of internal circle.
Scale is levelled properly if the blue point is
placed in the centre of internal circle in „level
view”. This state should be accepted.
In order to exit leveling option and turn back to
weighing mode, press „OK“ on bottom bar.