Instruction manual

49
− If option FrEE was chosen, you must enter quantity of sample, which will serve
to determine mass of single detail
− Pressing RIGHT ARROW key chooses digit which will be changed
− Pressing TOP ARROW changes value of digit
• Confirm entered value by pressing ENTER/PRINT key
• Display will indicate LoAd message – place on the pan as many details as
entered during option
• Press ENTER/PRINT key – balance will indicate quantity of sample (PCS
symbol is active)
• add remaining details, display will indicate their quantity.
Return to weighing
(see - 7.1.2. – return to weighing).