Installation Guide

mr
.
steam
®
towelwarmers Installation, Operation & Maintenance Instructions
_________________________________________________________________
Level
(not supplied)
Indicator
Light
Wiring Box
Bracket Screw
Threaded Knob
Finished surface
of wall
Towel Warmer
Bracket
Escutcheons
Set Screw
Threaded
Knobs
Wiring Box
Escutcheon
Threaded Knobs
Bracket
Bracket
Screw
Bracket
Screw
Allen
Wrench
Wiring Box
Allen
Wrench
Wiring Box
IMPORTANT:
LOOSENING END CAPS
WILL CAUSE INTERNAL
LIQUID TO ESCAPE AND
CAUSE PRODUCT DAMAGE.
5
BOX CONTENTS:
• Towel Warmer • (4) Threaded Knobs
• (4) Bracket Screws • (4) Bracket
• (3) Wiring Box Screws • Wiring Box Escutcheon
• (6) Set Screws • (2) Allen Keys
• Warranty • Instruction & Operation Manual
TO PREVENT SHOCK HAZARD, THE
ELECTRICITY MUST BE TURNED OFF AT THE MAIN PANEL
BEFORE ANY WIRING IS DONE.
1. Remove Towel Warmer and parts from the packing materials.
LOOSENING OR REMOVING END CAPS OR
HEATING ELEMENT ASSEMBLY WILL CAUSE INTERNAL LIQUID
TO ESCAPE AND CAUSE PRODUCT DAMAGE.
2. Using the allen key provided, loosen the wiring box set
screw. Set screw location varies by model as shown.
DO NOT remove the wiring box.
3. Gently rotate the wiring box as shown. Tighten the set
screw firmly to prevent the wiring box from rotating.
4. Locate the bracket on the wall by using the dimensions
given on page 4. The brackets are shown in the most
optimal location for mounting.
5. Using the screws provided secure the brackets to the wall.
6. Gently place the towel warmer on the brackets and screw
a threaded knob into each bracket. Mark the location for
the wiring box escutcheon.
7. Remove the towel warmer and secure the flange to the
wall per instructions.
8. Secure the towel warmer to the bracket by screwing a
threaded knob into each bracket.
NOTE: Hand tighten the threaded knobs only.
Using tools will mar or scratch the finish.
IMPORTANT NOTE: See electrical rough-in instructions
on page 6.
Install Towel Warmers in upright position only. Locate with
indicator light on bottom as shown. Failure to install
properly may result in a hazardous condition. See page 4.
!
WA RN IN G
!
WA RN IN G
!
CA UT IO N