Installation Guide

mr
.
steam
®
USER/HOMEOWNER INFORMATION
__________________________________________________________________
15
Care Tips
Use only mild soap and water on a soft cloth to clean
the control. Do not use abrasive cleansers.
Safety and Operating Information
A peel and stick warning sticker is provided
in the MrSteam steam generator Installation, Operation
and Maintenance Manual. This manual is provided with
every steam generator. The warning sticker must be read
and permanently affixed in a conspicuous location near the
steam room. Failure to read and affix this warning sticker in
a conspicuous location may result in serious injury or death.
Please call MrSteam at 800 767-8326 for a free replacement
or if you have any questions regarding the warning sticker.
Set the steam bathing duration and tempera-
ture according to personal preference, however it is highly
recommended to begin steam bathing at a low temperature
setting to gauge comfort and safety levels. Set the duration
at 10 minutes max. to gauge comfort and safety levels. This
will allow the steam generator to heat up and begin produc-
ing steam.
Do not use any iSteam
®
3 control without
reading and understanding the MrSteam steam generator
Installation and Operation Manual (PN 100472). Failure to
read and understand these instructions may result in an in-
operative or hazardous installation.
If an iSteam3 control is installed outside the
steam room a Remote Temperature Probe (PN MSTS) must
be installed inside the steam room per installation instruc-
tions supplied with the Remote Temperature Probe. Failure
to install according to instructions will result in an inopera-
tive control and overheating of the steam room.
CAUTION
!
CAUTION
!
WARNING
!
WARNING
!
Warranty
To view or download the MrSteam Control Warranty
and register your product go to
: blog.mrsteam.com/wr