QUICK INSTALLATION GUIDE GENERATOR Feel Good Inc®.
For Illustrative purposes only. Consult with qualified designer, architect or contractor for steamroom construction details and proper product placement.
CONTENTS GENERATOR LOCATION 4 POWER CONNECTION 5 WATER FEED 6 STEAM OUTLET 6 DRAIN LINE 6 AUTOFLUSH ® 7 CONDENSATION PAN 8 LIQUID LEVEL CONTROL BOARD 8 MAX GENERATOR INSTALLATION GENERATOR 9 10 WARNING The information in this guide is designed to provide a general overview of how MrSteam® products are installed. All images and diagrams are for illustrative purposes only and may have been altered for presentation purposes.
MR.STEAM® GENERATOR MR.STEAM® GENERATOR INSTALLATION LOCATING THE MR.STEAM® GENERATOR Select a location as near as practical to the steam room. Typical locations include: closet, vanity cabinet, climate controlled attic or basement. Locate steambath generator as close to shower as possible. 30ft cable is included. Optional 60ft cable available WARNING The information in this guide is designed to provide a general overview of how MrSteam® products are installed.
MR.STEAM® GENERATOR FIELD POWER SUPPLY CONNECTION Please refer to the wiring diagram in the Mr.Steam Installation Manual for complete wiring information. MAIN ELECTRICAL DISCONNECT PANEL HIGH VOLTAGE POWERLINE TO AVOID EQUIPMENT DAMAGE DO NOT CONNECT POWER SUPPLY DIRECTLY TO THE HEATING ELEMENTS!!! WARNING The information in this guide is designed to provide a general overview of how MrSteam® products are installed.
MR.STEAM® GENERATOR WATER FEED 1. Connect to cold water line. WATER FEED LINE (3/8” NPT) 2. Provide a shut off valve, and a copper or brass union on the water supply line. 3. Flexible copper tubing, braided hose, PVC or PEX if permissible by local codes. STEAM OUTLET PIPE 1. Provide a 1/2” copper or brass union on steam line. 2. Pitch steam line 1/4” per foot towards steam head or steam generator to avoid valleys and trapping of condensate.
MR.STEAM® GENERATOR OPTIONAL AUTOFLUSH® OPERATION The optional AutoFlush® System automatically drains the Mr.Steam® system following each use. A time delay allows the water to cool down (about two hours) before it drains by gravity for a safe and gentle operation.
MR.
MR.STEAM® GENERATOR NEW MAX STEAM GENERATOR INSTALLATION (MX 4E, 5E & 6E) DO NOT INSTALL IN VANITY OR OTHER SMALL SPACES 3/4” STEAMLINE MUST HAVE TWO STEAM HEADS ONE 27 1/2” LINEAR STEAMHEAD CAN ALSO BE USED LARGE ROOM CAPACITY MAX GENERATORS REPLACE MS SUPER 4E, 5E, 6E TWO GENERATOR CONFIGURATIONS 1” DRAIN Refer to the Mr.Steam MAX Installation manual for additional installation information.
MR.STEAM® GENERATOR TYPICAL MS GENERATOR 5 1 2 12 4 3 13 8 9 14 6 7 10 11 1 Contactor 2 Transformer 3 Liquid Level Control Board 9 Safety Valve 4 Liquid Level Probe 10 Drain Valve 5 Water Feed Solenoid 11 Stainless Steel Tank 6 Heating Element 12 Water Inlet 7 Express Steam Heater (optional) 13 Plug & Play Connection 8 Steam Outlet 14 Element Access Cover For Illustrative purposes only.
Product Dimensions* MS Generators 14 1/2” x 14 3/4” x 6 3/4” � Total Room Volume (cu.ft.) kW Amps 240V/1PH Wire Size AWG‡ Water Usage Gallons†† MS90E up to 71 5 21 10 0.67 MS150 72-107 6 25 8 0.80 MS225E 108-161 7.5 32 8 1.0 MS400E 162-257 9 38 8 1.2 MSSUPER1E 258-339 10 42 8 1.4 MSSUPER2E 340-411 12 50 6 1.6 MSSUPER3E 412-482 15 63 4 2.0 MX4E 483-678 20 84 2 2.7 MX5E 679-822 24 100 1 3.2 MX6E 823-964 30 125 2/0 4.0 Model No.
A leader and innovator in residential and commercial steam shower systems, spa products and experiences. CONTACT US HEADQUARTERS Sussman-Automatic Corporation® 43-20 34th Street Long Island City, NY. 11101 USA tel 1-800-76 STEAM (767-8326) WEST COAST Sussman-Automatic Corporation® 9410 South La Cienega Blvd Los Angeles, CA. 90301 USA tel 1-800-72 STEAM (727-8326) Or write to us at hello@mrsteam.com Mr. Steam, Mr. Steam and des.
