Installation Guide

mr
.
steam
®
INSTALLATION, OPERATION, AND MAINTENANCE AudioSteam
®
3. Connecting AudioSteam
8
Connecting AudioSteam
To connect AudioSteam to the steam generator, per-
form one or more of the following connections:
• Connect the FM antenna (included) and auxiliary
cord to AudioSteam.
• Connect speakers and subwoofer to AudioSteam
with speaker wire.
• Connect AudioSteam to the steam genera-
tor’s motherboard or daughterboard with the
AudioSteam control cord.
• Pair a Bluetooth-enabled device to AudioSteam.
Removing the AudioSteam Cover
To remove the AudioSteam cover:
1. Using a Phillips-head screwdriver, remove the two
cover screws from the front of the AudioSteam
(Figure 6), and remove the cover from the unit.
2. Connect the outputs of AudioSteam as shown in
Figure 7.
3. Remove the two foam block inserts from the
inner wiring channels and set aside (Figure 8).
Figure 6
Figure 8
Figure 7
• To reduce the risk of electric shock, do not
remove the screws on the back of AudioSteam.
No user-serviceable parts inside. Refer servicing to
qualified service personnel.
• To prevent electric shock, do not connect
AudioSteam to main power supply while the cover
is removed.
• AudioSteam does not come with speakers
and speaker wiring. The connection between
AudioSteam and the speakers must be “Class 2
Wiring” and installed by qualified personnel.
WARNING
!
Foam block
inserts
Power
Cord
Auxiliary and
FM Outputs
Speaker and
Subwoofer
Outputs
Communication
Port
All drawings are for illustrative purposes only.
INSTALLER