Installation, Operation & Maintenance Manual AromaSteam mr.steam ® Feel Good Inc.
mr.steam ® AromaSteam Operation and Installation Instructions ______________________________________________________________________________________________ ! WARNING RISK OF ELECTRIC SHOCK - This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
mr AromaSteam Operation and Installation Instructions .steam ______________________________________________________________________________________________ ® BOX CONTENTS Shipping Hose 6 ft. Pressure Hose AromaSteam System & Bracket Assembly (with integrated 6 ft. power cord, 8 ft. request cable) 1/2 inch NPT Atomizing Nozzle 2 ft.
mr AromaSteam Operation and Installation Instructions .steam ______________________________________________________________________________________________ ® GENERAL INSTALLATION (cont.) Clearance to heat sources • Do not install the AromaSteam system directly below or above the Mr. Steam steam generator where it is subject to heat. • Minimum distance between the AromaSteam system and a heat source (e.g. steam generator, heating system) is 1.5 ft. If this minimum distance of 1.
mr AromaSteam Operation and Installation Instructions .steam ______________________________________________________________________________________________ ® Installation of Suction Hose to AromaSteam System Suction End Nut 1. Unscrew the suction end nut from the pump head and remove short end of shipping hose (discard shipping hose, keep pressure end nut). Suction Pump Pressure Valve Head Valve Pressure End Nut 2. Remove suction end nut from the shipping hose. 3.
mr AromaSteam Operation and Installation Instructions .steam ______________________________________________________________________________________________ ® Electrical Connection of AromaSteam System AromaSteam Wiring Schematic AromaSteam Plug CAUTION This AromaSteam system is factory wired. If ! the power cord of the Aroma Steam system is damaged it must be replaced by the Sussman-Automatic service department or similarly qualified personnel in order to avoid an electric shock hazard.
mr AromaSteam Operation and Installation Instructions .steam ______________________________________________________________________________________________ ® OPERATION 8:19 AM iSteam® 1. Press the START button to turn the steam generator on. 20 min. 2. In the dashboard press the AROMA button, the button will be highlighted when AromaSteam is on. 110˚ F STOP AromaSteam User 1 User 2 3. Aroma oils will automatically be pumped into the steam line at preset intervals. iTempoPlus® aroma 1.
mr AromaSteam Operation and Installation Instructions .
