Specification Sheet

mr
.
steam
®
Technical Specifications
iGenie
®
iGENIE INTERFACE
MODULE INSTALLATION
• Connect the iGenie Interface Module to the generator
by plugging in the provided 5 foot cable to the iGenie
Interface Module and the Steam Genie connector on
the side of the generator as shown.
• Mount the iGenie Interface Module in a dry, indoor lo-
cation. For maximum range, the Steam Genie Interface
Module should be mounted as high as practical and
away from metal that could effect the radio signal. Se-
curing it to a nearby wood stud is ideal. The antenna
should be pointing upwards.
iGENIE OPERATION
• When the Steam Genie FOB light is off, press the but-
ton once and the Steam Genie FOB light indicates if
the steam is on or off. When you press the button, the
light will momentarily twinkle between red and green.
A red light indicates that the steam is off and a green
light indicates that the steam is on.
• To turn the steam on or off, press the ON/OFF
button again while the light is illuminated. After a short
delay the light will change from red to green (steam
on) or green to red (steam off).
TS0002 5.14
mr
.
steam
®
Sussman-Automatic Corp® [e-mail] www.mrsteam.com
43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: [phone]
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: [phone]
MODEL FINISH PROJECT INFORMATION
iGenie


Black


White
Notes:
Location:
Architect:
Engineer:
Contractor:
Submitted By:
Date:
BOX CONTENT
• iGenie
®
• iGenie Wall Mount
• Interface Module
• 2 Module mounting Screws
• 5 ft. Module Connection Cable
• Installation and
Operation Instructions
• A wall mounted magnet
is provided with the
iGenie control as an
optional convenience.
FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION
visit mrsteam.com or scan the QR code before installation to download the Installation, Operation and
Maintenance Manual or refer to the manual provided with the unit.