Installation Sheet

AudioWizard INSTALLATION
24
AudioWizard
Mr. Steam’s AudioWizard offers fully integrated audio
control inside the steam room and or shower.
With an integrated Blue Tooth Audio Streaming
System, the AudioWizard can pair up to eight devices
and four in-shower speakers.
INSTALLATION
1) Locate the AudioWizard
The AudioWizard control cable is 30ft and the power cord
is 6ft, ensure the control and AudioWizard are located
accordingly. Locate in a dry location where the wireless
signal will not be interrupted.
CAUTION: ELECTRIC SHOCK HAZARD!
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. DO NOT install AudioWizard in
the steam room or any location where it may become wet.
2) Test Bluetooth® signal before mounting AudioWizard.
3) Mount AudioWizard
The AudioWizard should be installed on a vertical surface.
4) Install AW Control Cable
Route the AudioWizard control cable from the AudioWizard
to the desired control location.
If using an iSteam control see the iSteam Control IOM
(PUR 100477) for complete details on locating and installing
the iSteam control.
5) Connect the Control to AudioWizard®
The AudioWizard must be connected to either the iSteam
Control® or the AW Control. AudioWizard is supplied with
a 30 ft. cable that has 6-pin mini-din male connectors
on each end.
69992_PUR_100431_MrSteam.indd 25 2013-11-15 07:38