Installation Sheet

CONTROL CABLE CONNECTION
Connecting the Control Cable
to the Steam Generator
Route the control cable (provided with the control)
from the wall cutout to the steam generator.
IMPORTANT: Do not strain, staple, pinch or otherwise
damage the control cable. Route cable as required to
permit replacement.
The 30’ (and optional 60’) control cable features identical
Mini-Din connectors at both ends.
Note: The standard length of the cable for connecting the
control to the steam generator is 30 feet.
The steam generator and control must be located
accordingly. A 30’ cable is standard. Contact Mr.Steam
to purchase an optional 60’ cable (PN 103990-60) for
iTempo controls.
A 60’ cable is available for use with iSteam controls
(PN 104117-60).
18
For Illustrative purposes only. Consult with qualified designer,
architect or contractor for steamroom construction details.
69992_PUR_100431_MrSteam.indd 19 2013-11-15 07:36