Controls Installation Sheet

mr
.
steam
®
Installation & Operating Instructions
______________________________________________________________
16
mr.steam
aroma chroma
time
mr.steam
chroma
timetemp
aroma chroma
mr.steam
timetemp
SETTING THE TEMPERATURE
Diagram 6: Press TEMP key to set the desired temperature or
display the temperature setting.
Diagram 7: The control is preset and will display a tempera-
ture setting of 110˚F (default setting). With the temperature
displayed, press the UP or DOWN keys to set the desired tem-
perature (80°F to 120°F) in one degree increments.
Set the steam bathing temperature according to personal
preference, however it is highly recommended to begin steam
bathing at a low temperature setting to gauge comfort and
safety levels.
MEMORY FEATURE
If the control is turned off manually before it times out then the
default settings of 20 minutes and 110°F will be used the next
time the control is turned on. If the control times out (not manu-
ally turned off) then the previous user time and temperature
settings will be used when the steambath is turned on.
PROG 1 AND PROG 2 Diagram 8
Use the P1/P2 key program to store preferred settings.
To program preferred settings:
Press ON/OFF key to turn generator on.
Press P1/P2 key once to program PROG1.
Press it twice to program PROG2. The selected parameter
will be displayed. Enter the preferred time and
temperature settings.
The iTempoPlus will store the following settings: set point, time
duration & aroma state. To select PROG1 or PROG2:
Press ON/OFF key then press P1/P2 key once to select
PROG1, press it twice to select PROG2. The steambath will
begin to operate at the stored settings.
DIAGRAM 6
DIAGRAM 7
DIAGRAM 8
Drawings for Illustrative Purposes Only.