Use and Care Manual

Toiletsaber® Use and Care Manual
Toiletsaber® was specifically designed to clear visible toilet clogs (paper & poop),
which are the most common. If there is no visible clog, this means the obstruction is
farther back in the waste pipe, and it may not be within reach of a Toiletsaber®. In
this rare instance, a toilet plunger or toilet auger would be recommended.
Please follow these Toiletsaber® instructions for best results on visible toilet clogs:
1. Raise water to this level by flushing or using a
container. Tip: Add 6-8 fl oz of any liquid soap (bath
foam, shampoo, or dish soap) to the water.
2. Rake ALL of the excess waste away from the hole
until you can feel the porcelain below.
3. Turn over and poke through the remaining clog. Clean
with a thick disposable wet wipe or cloth and disinfect
using bleach.
Tip: If the clog remains, keep repeating steps 1, 2, and 3 until
the clog is cleared.
Toiletsaber® Instruction Video
https://www.mrsparkle.com/pages/toiletsaber-instruction-video
Toiletsaber® Customer Support
https://www.mrsparkle.com/pages/contact-us