Instruction Manual English Model name: cAPPito Manufacturer: Mr.Signal Order no.: 2248387 instructions´ Identifi cation number --Mr.Signal cAPPito MrS20200305M01-EN-Product identifi cation number: 2020030301 IMPORTANT ! READ CAREFULLY BEFORE USE! KEEP FOR FUTURE REFERENCE! 1. Introduction Dear customer, this product meets the legal national and European requirements.
Symbols Please read the manual carefully! Only use this product inside, and never let it get in contact with humidity! 2. Intended use This product must be operated with an external power supply that complies with the relevant regulations and standards of the country of destination. The power supply of the power supply unit should provide 230 Volts. The power supply itself should supply 5V DC and a minimum rated current of 3A ..
numbers of conformity can be found at www.raspberrypi.org/compliance . Operation is only permitted in closed rooms, i.e. not outdoors. Contact with moisture, e.g. in the bathroom or similar, must be avoided at all costs. Any use other than that described above will damage this product and is also associated with risks such as short circuit, fi re, electric shock, etc . This product meets the legal, national and European requirements.
• The device is constructed in protection class I. Only a proper mains socket (230 V/AC, 50 Hz) of the public power supply system in earthing contact design may be used as the voltage source. b) Installation, place of operation • Place the product on horizontal surfaces at a maximum distance of 3m and at a height of about 1.20m with the company logo facing the auditorium (participants, students, examinees).
• • loaded onto the Mr.Signal cAPPito Base. This information can then be retrieved by the participants. The information is transmitted via a radio interface using WiFi in the 2.4 Ghz and 5.0 Ghz f requency range. By using the cAPPito Base, the cost-intensive acquisition of the digital inf rastructure (fast Internet connection) can be reduced considerably. With the BYOD approach (Bring your own device) the acquisition and maintenance of the terminal equipment for the subscribers is usually unnecessary.
(default-PW: "passwords"). The teacher, also called tutor, has a "tutor password" (default tutor-PW: "test") which gives access to the interface and the individual modules such as presentation, question catalogues and fi leshare. Note: The passwords can be changed at any time in the "System" module under W-Lan or TutorPassword. If you forget your set WLAN password, you will fi nd your master password here.
. Assembly of the hardware 1) Insert the enclosed WiFi dongle into the open USB 3.0 port (blue) of the cAPPito Base. 2) Insert one end of the power supply into the Micro USBC port of the cAPPito Base. 3) Insert the other end of the power supply into a 230 Volt, 50 Hertz power outlet. 8. Software and initial operation To save paper all details and features of using cAPPito are shown in the integrated video tutorials. They are also available via the products website.
(View„Tutor “) b) Presentation
This module can be compared to the function of a "beamer", whereby videos, images and presentations are imported as PDFs for an audience/auditorium/student on their own Smart Device at a desired time. The mobile use proves to be a great advantage, as a stationary projection surface (wall) is no longer required and access to the digital mediation is made easier.
(View „Tutor “) (View „Tutor “)
(View „Participant“) d) Fileshare In order to create further interactivity between teacher and student, a temporarily activated folder/list is provided. The aim of this is the upload of teaching materials (worksheets, test evaluations, pictures, short videos, voice) by the student. This folder/list is temporarily unlocked by the tutor on site. The uploaded fi les can only be viewed by the tutor (mailbox function). The Student only assigns a fi le name for the upload.
(View „Tutor “) (View „Participant“)
10. Maintenance a) General Check cAPPito regularly for damage to the power cable or the housing. If it can be assumed that safe operation is no longer possible the product must be taken out of operation and secured against inadvertent operation. To do this, always unplug the power plug f rom the power outlet.
to reach room temperature unplugged. Never operate the unit if condensation is visible or if it is damp. • Never pull the power plug out of the socket by the cable. Only ever pull it out of the mains socket by the grip surfaces provided. • Disconnect the product f rom the power supply if it is not to be used for a long period of time. • For safety reasons, always unplug the product f rom the power outlet during a thunderstorm.
Signal rate: 5GHz 11ac: Up to 867Mbps(dynamic) 11n: Up to 300Mbps(dynamic) 11a: Up to 54Mbps(dynamic) 2.4GHz 11n: Up to 400Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) Receiver sensitivity: 5GHz 11a 6Mbps: -91dBm 11a 54Mbps: -76dBm 11n HT 20：-71dBm 11n HT40：-70dBm 11ac HT 20: -68dBm 11ac HT40: -64dBm 11ac HT80: -62dBm 2.
Storage capacity The memory of the Mr.Signal Bases is 64 GB in the standard model. Mr.Signal Bases with higher capacities are available on request. Please contact us! 15. declaration of conformity Hereby Mr.Signal GmbH, Schumannstr. 9, D-90429, declares that this product complies with Directive 2014 /53 EU, the full text of the EU Declaration of Conformity is available at the following Internet address: https: //www.raspberrypi.org/documentation/hardware/raspberrypi/ compliance/rpi_ DOC_4b_ EU_ RED.pdf C.
