Operation Manual

5.2.1.2. Set the IP address: configuring network
You can change the IP address of your camera individually.
• Choose ‘Configuring network’ and click on the Wifi tab.
• Choose for DHCP if you want to use the automatic assigned IP address.
• If you want to use the same IP address every time, you select “Fixed IP”. Put in the IP address manually by
clicking in the “IP address” box.
Press “OK” to save changes. The device status will show “Login successful” when the camera is logged into the mrSafe
server.
5.2.1.3. Restore the default setting
To delete all previous settings and passwords of the camera select “restore the default setting”.
A pop-up window will appear to ask if you are sure to restore the default settings. Press “Yes” to delete all settings.
5.2.1.4. Camera restart
You can restart the IP camera by pressing on “Camera restart”. The camera will now restart. This can take a few
minutes.
11