Operation Manual

5. LAN CAMERA

All the cameras that are online in your local network (LAN) will be displayed in the LAN list.

5.1. LAN Camera browsing

Go to the LAN list and click on the camera you want to see. The program is now going to make contact with your IP

camera. This can take a few seconds.

When the image appears, the camera is ready to operate. If the image is not completely clear /sharp, you can turn the

lens focusing ring till the image appears sharp.

If you want to control the camera you can press the buttons of the control panel. (For more information go to chapter

“7.1 Control Panel”).