Operation Manual

In the App, go to “LAN” (bottom). You will now see the camera. Click on the
symbol next to the camera and
select "Wifi".
Click on “Search” to display the available networks. Select your network and enter your password. After confirmation,
the IP camera will restart (this will take about 2 minutes),
After you have set the wifi (as described below), you should first check if the camera is functioning properly when it is
placed close to the modem. If that is the case, you must place the camera at the desired location and take a few days
to check if on that location the wifi connection remains stable, and if the wifi signal is always strong enough. If that is
the case, you can mount the camera permanently. If the connection is not stable, then you should look for a location
closer to the modem, connect to a network or install a wifi repeater between the camera and the Internet modem.
7