Operation Manual

6.3.1. Setting Options

6.3.1.1. Video settings

In the menu Video Settings you can adjust the following settings:

 Substream/Mainstream: mrSafe IP cameras only use main stream. Do not change this setting!

 Resolution: you can change the resolution of the images according to your own needs. For more information

about resolution see “3. Terminology”.

 Framerate: you can change the amount of frames according to your own needs. For more information about

frame rate see “3. Terminology”.

 Bitrate: For more information about bitrate see “3. Terminology”.

Press "Done" to save the settings.

6.3.1.2. SD Card Settings (ONLY FOR HD IP CAMERAS)

Please make sure that the micro SD card is inserted in your IP camera.

1. Power off the IP Camera.

2. Open the IP camera by removing the 4 screws.

3. Carefully take off the backside.

4. Insert the micro SD card.

5. Power ON the IP Camera.

NOTE: The SD card should be a Class 10 SD card with a maximum capacity of 32 GB!