Operation Manual

• Reboot the camera: You can restart the camera from a distance. This may take several minutes.
• Restore to factory settings: all passwords and other stored information will be erased and restored to factory
settings.
• Upgrade: Firmware update, this is done automatically.
6. WAN CAMERA
6.1. WAN Login
Select “Register”.
Enter a user name, password and e-mail address. Press “OK” to confirm your registration. You will be sent to the login
page.
For use over the Internet (WAN), you will be asked to log in. There are 2 possibilities to login:
1. You can login per camera. Find the login details at the bottom of the IP Camera. You need to enter the user
name (CAM ID) and Password (Login Password) or scan the QR-code by pressing the QR symbol. Now you
can only see the camera where you have logged into.
13