User Guide






C)Press‐Forceevaluation
Closethepresstoolwithoutafittingorhandleextensions,theappropriatePress‐Forcetofully
closethepresstoolwithinsertsshouldbeabout33pdf(poundforce).Ifnot,thepresstool
needstobeadjustedbeforeuse,pleasereferto“Step3”foradjustment.


Step3.PresstoolAdjustment
A)Openthepresstoolandloosenthe"lockingscrew"(PartNo.13)counter‐clockwiseabout3
turns.

B)ToadjustPress‐Force,turnthe"adjustingscrew"(PartNo.14.)clockwisetoincreasethe
press‐force,andcounter‐clockwisetodecreasethepress‐force.Startwithabout1/4turn,and
repeatthisprocessuntilthePress‐Forceisabout33pdf(poundforce).
