Product Overview

Product Data Sheet

www.mrpexsystems.com

MrPEX

1 ¼” Stainless Steel Manifold

MrPEX1¼”StainlessSteelManifoldismadefromhigh

qualitystainlesssteel,andisofferedin2through

12loopconfigurations.Themanifoldcomesmounted

onbracketsanditisequippedwithfullportballvalves

providedwiththermometers,manualairventsandfill/drain

valves.ThebranchCvvalueis

1.38andthemanifoldbody

accommodatesflowsupto14gpm.

TheSUPPLY(upper)manifoldisfittedwithbalancing

flowmeterswithreadablerangeof0to2GPMthat

allowflowadjustmentofeachindividualloop.The

flowmetershaveabrassbodyandthesightglassis

madefromtemperatureandimpact

resistantplasticmaterial,

allcomponentsareantifreezeresistantuptoa50%mix.

TheRETURN(lower)manifold,hasmanualon/offvalvesthatcontrolstheflowforeach

individualcircuit.ThemanualknobcanberemovedtoaccommodatetheMrPEXactuators

(part#5120700&5120701).

Supplyandreturnmainscanbeconnectedfrom

eitherleftorrightsides.Themanifoldcomes

readyforaleft‐handconnection.Connectionfromtherightcanbedonebyremovingthe

manifoldbodyfromthebracketsandflippingthemover.

Part # Description Type List

3250200 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 2 Branch 313.00$

3250300 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 3 Branch 364.00$

3250400 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 4 Branch 415.00$

3250500 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 5 Branch 466.00$

3250600 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 6 Branch 518.00$

3250700 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 7 Branch 569.00$

3250800 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 8 Branch 620.00$

3250900 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 9 Branch 672.00$

3251000 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 10 Branch 743.00$

3251100 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 11 Branch 797.00$

3251200 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 12 Branch 850.00$

PAGE 1
Product Data Sheet MrPEX® 1 ¼” Stainless Steel Manifold MrPEX 1 ¼” Stainless Steel Manifold is made from high quality stainless steel, and is offered in 2 through 12 loop configurations. The manifold comes mounted on brackets and it is equipped with full port ball valves provided with thermometers, manual air vents and fill/drain valves. The branch Cv value is 1.38 and the manifold body accommodates flows up to 14gpm.
PAGE 2
MrPEX Product description Manifold dimensions Part # Type Length L 3250200 2 Branch 10.6" 3250300 3 Branch 12.6" 3250400 4 Branch 14.6" 3250500 5 Branch 16.5" 3250600 6 Branch 18.5" 3250700 7 Branch 20.4" 3250800 8 Branch 22.4" 3250900 9 Branch 24.4" 3251000 10 Branch 26.3" 3251100 11 Branch 28.3" 3251200 12 Branch 30.