Manualshelf

Product Overview

ManualsBrandsMr. PEX ManualsHeating SuppliesManifold Ball Valve w/ Thermometer, Straight (Box of 2)
12
Table Of Contents
Product Data Sheet
www.mrpexsystems.com
MrPEX
®
1 ¼Stainless Steel Manifold
MrPEX 1 ¼Stainless Steel Manifold is made from high
quality stainless steel, and is offered in 2 through
12 loop configurations. The manifold comes mounted
on brackets and it is equipped with full port ball valves
with thermometers, manual air vents and fill/drain
valves. The Cv is 1.39 per branch.
The SUPPLY (upper) manifold is fitted with balancing
flowmeters with readable range of 0 to 2 GPM that
allow flow adjustment of each individual loop. The
flow meters have a brass body and the sight glass is
made from temperature and impact resistant plastic,
all components are antifreeze resistant up to a 50% mix.
The RETURN (lower) manifold, has manual on/off valves that controls the flow for each
individual circuit. The manual knob can be removed to accommodate the MrPEX actuators
(part# 5120700 & 5120701).
Supply and return mains can be connected from either left or right sides. The manifold
comes ready for a left-hand connection. Connection from the right can be done by
removing the manifold body from the brackets and flipping them over.
Part # Description Type List
3250200 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 2 Branch
281.00$
3250300 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 3 Branch
328.00$
3250400 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 4 Branch
374.00$
3250500 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 5 Branch
420.00$
3250600 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 6 Branch
466.00$
3250700 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 7 Branch
512.00$
3250800 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 8 Branch
558.00$
3250900 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 9 Branch
604.00$
3251000 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 10 Branch
669.00$
3251100 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 11 Branch
717.00$
3251200 1 1/4 Stainless Steel Manifold Assembly w/Flowmeter and ball valve 12 Branch
765.00$

Summary of content (2 pages)