Install Instructions
The MrPEX® Stainless Steel manifolds have a G3/4” Eurocone (EK20) loop connecons.
To connect PEXa and PEX-AL-PEX pipes, use the appropriate MrPEX® compression ngs that t our
manifolds. See MrPEX Part Catalog.
Start by making a square cut at the end of the tube even with the
boom of the manifold outlet nipple (without the ng) using a
suitable tubing cuer. If PEX-AL-PEX Tubing is used, also ream the
tubing by using our reaming tool.
For compression pre-assembled ngs the assembly steps are:
1 - Slide on the nut with pre-assembled compression ring on the pipe
2 - Put the insert into the end of the pipe and push it all the way in
unl it stops. Insert should be fully inserted into the pipe
3 - Push the insert into the manifold connecon seat making sure the O-ring doesn’t get caught.
4 - Holding the tubing straight and in place, slide up the compression nut and thread it onto the
manifold connecon. Tighten nut with suitable wrench. The tubing will relax slightly under the
pressure, so the ng needs to be ghtened a second me aer about 20 to 30 minutes to ensure
ghtness
Connecng the pipes to the manifold
Position Position Description
MrPex electrothermal actuator 24V AC 2-wire
Manifold Ball Valves, supply & return, straight, w/ thermometer, spare part
Thermometer, spare part
1" BSP Manifold Connection X G 1-1/4" Union Flat Gasket, spare part
Flat Gasket 1-1/4", spare part
Flowmeter for manifold series 325XXX and 332XXX, spare part
Manual Air Vent, spare part
1-1/4" Manifold Bracket for manifold series 325XXXX, spare part
Plastic Valve Cap, spare part
Fill/Drain Valve for manifold series 325XXXX and 332XXXX, spare part
G 1-1/4" Flat Gasket X 1" Female NPT Straight Fitting Kit
G 1 1/4 Flat Gasket X G 1 1/4 Flat Gasket Union Elbow Kit
Plastic Adapter for electrothermal actuator 5120701
MrPex electrothermal actuator 24V AC 4-wire w/ End Switch
5120701
3250018
3250001
3250002
3761175
3741172
3740011
3741171
3741173
3741174
3740002
3250010
3250007
***
5700010
5120700
Each
Set of 2
Each
Set of 2
Set of 2
Each
Each
Set of 2
Each
Each
Each
Set of 2
Set of 2
Set of 2
Each
Each
Quick connection
1" NPT X G 1-1/4" Flat Gasket
32 ˚F to 175 ˚F
Rubber EPDM 60 SH
0 to 2 GPM
Threaded M30x1.5 - Blue
Threaded M30x1.5
3/4" GHT
For sizes 3/8" - 1/2" - 5/8"
Threaded M30x1.5 - Type VA10
Quick connection
Type Unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16